Ultra Mount Mounting Instructions

1. Determine where you want to display your jersey.
2. Hold the mounting base to the wall and make two marks on the wall through holes (hold mount as level as possible).
3. Remove mounting base and drill holes on spots marked. If you are using the included wall anchors (good for drywall) use a 3/16 size drill bit. If mounting directly into a stud or other material use a drill bit the same size as the screw.
4. Insert wall anchors (drywall only). Be sure they are flush to the wall.
5. Use included screws and attach mounting base to the wall. Secure firmly.
6. Slide rod through mounted base.
7. Hang jersey on rod. Center rod and jersey in respect to mounting base.
8. Place cap on base.

Installation Hints

If rod is too long you can easily shortened by using a hack saw or pipe cutting tool to desired length. Simply cut the bar and replace the end cap.

For best display results the cross bar should be 1-2 inches shorter than the measurement from shoulder seam to shoulder seam. If rod is too long you can easily shortened by using a hack saw or pipe cutting tool to desired length. Simply cut the bar and replace.